Installing a suspended fireplace in Australia: ceilings, installers and approvals
A suspended fireplace fixes into the ceiling structure, so installation is about the ceiling more than the fire. Here is what the structure needs to hold, who should install it, and what to check with your council.

A suspended bioethanol fireplace hangs from the ceiling structure, so the key question is whether your ceiling can carry it. The Naked Flame forms need a structure that holds 350 kg to allow for swing, a clear space of at least 150 mm around the fire and the base at least 500 mm above the floor. A builder or carpenter usually does the work. Because there is no gas and no chimney, there is no gasfitter and no roof flue to install.
Step 1: confirm the ceiling can take it
Every suspended fire fixes into the ceiling framing, not the plasterboard. What the structure needs depends on the fire:
| Fire | Weight | What it hangs from |
|---|---|---|
| Sphere, Curve 90, Orbit, Silo, Curve 120 | firebox 46 to 113 kg, plus flue at 16 kg a metre | a suspension bracket in a structure that holds 350 kg |
| Cocoon Aeris | 13.5 kg | a ceiling bracket and slim pole |
| Iconic 900 | 13.8 kg | a ceiling bracket and extension poles |
| Planika Pillar | upper section up to 50 kg | the ceiling structure, plus a 230 V power connection |
If the joists or rafters do not line up with where you want the fire, your builder can add blocking or a beam. This is far easier during a build or before the ceiling is lined.
Step 2: choose the fitting for your ceiling
- Flat ceilings: a flat ceiling fitting.
- Raked or cathedral ceilings: the Naked Flame forms have a pitched fitting, and the Cocoon has an angled bracket.
- High ceilings: the Naked Flame flue is cut to your ceiling height, the Iconic 900 uses extension poles to 2,542 mm overall, and the Cocoon has extension poles.
Send us the ceiling height and pitch and we confirm the fitting and flue length before you order.
Step 3: clearances and room size
- At least 150 mm clear all the way round the Naked Flame forms.
- The base at least 500 mm above the floor.
- A room of at least the minimum volume for the burner, from 80 m³ to 110 m³ for the Naked Flame forms. See our size guide.
- Follow the maker's manual for clearances to curtains, furniture and walls.
Who installs it
We do not install. A suitably qualified person must install the fire following the maker's instructions and your state and council building requirements. For a bioethanol fire that is usually a licensed builder or carpenter, because the work is structural fixing. The Planika Pillar also needs an electrician for its power connection. You do not need a gasfitter, and nothing goes through the roof.
Do you need council approval?
Requirements vary between states and councils. Fixing a heavy item into the ceiling structure can count as building work, especially if framing is altered. Ask your builder or a building certifier before you start, and tell your insurer about the fire. Products sold in Australia must meet the national safety standard for decorative ethanol devices. See are bioethanol fireplaces legal in Australia.
What installation costs
It depends on your ceiling, access and whether the structure needs reinforcing. A straightforward fix into existing framing is a small job; adding a beam in a finished ceiling is more. Get a quote from your builder with our specs in hand. See what a suspended fireplace costs.
Common questions
Can a suspended fireplace hang from plasterboard?
No. It must fix into the ceiling structure.
Do I need a gasfitter or a flue?
No. Every fire we deliver to Australia is bioethanol, so there is no gas connection and no roof flue.
Can I install it myself?
It must be installed by a suitably qualified person to the maker's instructions and your building rules.
Our technical specs and architects and designers page have dimensions and loads for your builder.